Touch-up pencil Mercedes Benz 9701 Ptt Silber Met. 2C (12ml)

SKU: 67-601088-MER-9701
GTIN: 4060034395288
HAN: 601088-10-0110
Category: Automobile
Manufacturers:

Touch-up pencil Mercedes Benz 9701, colour ptt silber met. 2c for the reperation of small scratches, caused by stone-chips, inattentive people, etc. When using a metalic laquer, we recommend the usage of a clear paint to guarantee a high gloss.

8,19 €

682,50 € per 1 l

incl. 19% VAT , plus

Available immediately
Delivery status: available now
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Description

The Mercedes Benz paint colour 9701 ptt silber met. 2c was painted 1989 - 2000. It is perfectly suited for the reperation of small scratches.

Quality and Properties

Epoxy quality
Isocyanate-free
Resistant to solvents, petrol and chemicals
Increased UV protection
Tough, very hard surface
Quick-drying
Very efficient
High gloss

Physical and Chemical Data

Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 30 minutes
Non-sticky: after approx. 2 hours
Dry to touch: after approx. 8 hours
Can be polished: after approx. 24 hours
Cured: after approx. 24 hours
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
Temperature-resistant: up to 100°C
Storage stability:
24 months if appropriate storage provided (=10°-25°C, relative air humidity max. 60%).
Disposal: Put only empty cans into the recycling bin. Bring cans with remainders of paint to the special refuse disposal.
Size: 12 ml

Application

Derust damaged area with Rust Converter.
When there is bare metall, we recoment a primer:

Shake theTouch-up pencil Mercedes Benz 9701, colour ptt silber met. 2c till you hear the noise of the mixing balls. In order to mix the paint pigments in the lacquer well, you should shake for approx. 2 - 3 minutes. If you use 2-coat clear lacquer (without mixing balls) 1 minute is sufficient.
To fill small scratches, apply 2 - 3 caots (in intervals of approx. 20 minutes): slightly wipe off the brush so it does not drop, then generously fill the scratch. Slight scratches should be filled as thin and narrow as possible,in order to avoid that you enlarge the damage. After approx. 20 minutes drying time, metallic paints should be coated with a clear lacquer, in order to protect the metallic particles from weathering influences.